The communication methods of AGV can be divided into internal communication and external communication, which are as follows:
Internal Communication
The main communication methods among internal components of AGV (such as between the main controller, battery, and driver) include the following:
- 232 Communication: A common serial communication method suitable for short - distance and low - speed communication scenarios.
- 485 Communication: A differential communication method with strong anti - interference ability and long transmission distance, suitable for communication scenarios of multi - device interconnection.
- CAN Communication: A serial communication protocol used in automotive and industrial automation, featuring high reliability and real - time performance, suitable for communication in complex control systems.
- Network Communication: Communication is carried out through network protocols such as Ethernet, suitable for communication scenarios requiring high - speed and large - data - volume transmission.
- USB Communication: A high - speed, plug - and - play communication method, often used for data transmission and debugging between devices.

External Communication
The main communication methods between AGV and external systems (such as the central scheduling system, other AGVs, environmental sensors, etc.) include the following:
- Continuous Communication:
Radio - Frequency Communication: AGV communicates with the ground controller through radio waves, featuring long communication distance and high flexibility.
Infrared Laser Communication: Data is transmitted using infrared laser beams, which has the advantages of good directivity and fast transmission speed. However, the communication distance and stability are affected by environmental factors. Currently, online real - time two - way data communication via infrared laser can reach a distance of 120 meters. If the laser power is insufficient, it can be relayed every 15 - 20 meters.
Wire Induction Communication: Wires are buried within the guidance path, and AGV communicates by sensing the signals in the wires, suitable for AGV systems with fixed paths.
- Decentralized Communication: Communication is provided at predetermined locations (such as AGV docking stations), generally achieved through induction or optical methods. This method is relatively inexpensive, but if a fault occurs between two communication points, the AGV will be unable to contact the ground control station.
- Wi - Fi Communication: It is a common communication method between AGV and the central scheduling system, with the advantages of flexible deployment and fast speed. However, it is vulnerable to environmental interference and has problems such as limited coverage and high latency under high - load conditions.
- 5G Communication: With the rapid development of 5G technology, it has also been applied to AGV. 5G communication features ultra - low latency and large bandwidth, which can significantly improve the communication stability and efficiency of AGV. Through 5G communication, AGV can achieve high - definition video transmission, remote operation, and more complex task scheduling. Dynamic frequency - tuning technology can also automatically switch to a clearer channel when the signal frequency band is congested to avoid communication interference.






